Open up the mailbox to gain access to the back of the lock. You may be able to break it with a flat screwdriver, hammer, and some locking pliers.
At first, take manicure scissors or a small thin knife.
How to pick a mailbox lock with a screwdriver. Move the pick from the back of the lock to the front while lowering it and elevating it in the keyway. After a few weeks, the mailbox key refused to. You can replace your mailbox lock.
The sub standard quality locks that most folks use for protecting their mailbox are so fragile, that even when a thief doesn’t know how to pick at them or get a duplicate key, he can very easily smash the lock to pieces by using standard tools like a screwdriver or a hammer. Use of lever or pick locks. Fortunately, you may be able to pick the lock on your mailbox using a couple of simple tools.
If you’ve lost the keys to your mailbox, you may be able to pick the lock using a few simple tools, like hairpins and paperclips. Padlocks for my kids to. Open up the mailbox to gain access to the back of the lock.
The thief will insert a screwdriver or fingertips and pull down the door front. The flat side should be facing up. Now push the lock using a screwdriver.
Before you lose all hope, my friend, let me pipe in with one last quip. If you are not getting anywhere with this method of how to pick a mailbox lock, change your tension. View more on it here.
Then drill a hole in the center of the lock and take a fairly large screwdriver, a small pair of scissors or a hammer. Insert the thin end of the tool into the lock hole. I’ve used a screwdriver and a bobby pin to open a cheap mailbox lock for a friend who’d lost his key.
Your landlord should have replacement locks. Can i drill it out with 9/64 bit and pull the old lock and replace with. It’s a safe bet that after drilling you will have to change the entire lock mechanism.
Use the lock to bend the tip of your pin into a pick. Use a wrench to loosen the nut and remove it completely, the lock will fall out the front. Turn it slowly until the door open.
This will break the lock, and you can now open the mailbox. If the lock does not open in 60 seconds, release tension and try again. How do you unfreeze a mailbox lock?
Push the rest of the pin to the left, bending the end of the pin slightly. It should take a few seconds, but it’s loud. Try the key in the mailbox until the ice loosens and you are able to work the lock.
Screw the cam into the new lock on the back. More expensive locks may require a lock pick set. From the back there will be a large nut holding the lock onto the mailbox.
If the above methods don't work, then you can try with a thin hairpin. Insert the hairpin into the lock. Unscrew the locking cam on the back of the lock with a screwdriver.
Most mailboxes use a pin tumbler system. You can learn to pick a mailbox lock with very little skill or effort. Turn the lock as like the key.
Prepare a lock pick and lever. You can purchase lock picking tools or use a paperclip bent into a. To pick a lock, you'll need a tension wrench, which will turn the lock, and a pick, which will pop the pins inside of the lock so that it can be turned.
Find a screwdriver that almost fits down the key hole, and hammer it as far into the lock as you can, then turn it with the pliers. Like door locks and padlocks, many of them (but not all) can be picked with a hairpin and a small screwdriver. Unscrew the locking cam on the back of the lock with a screwdriver.
Remove the nut or the clip that holds the lock in place. Locking mailboxes effectively prevent theft. When he opens it, your mailbox lock will be accessible from the front and back.
Push a little to break the mechanism. Repeatedly heat the keyhole and the key, holding it under the hair dryer for 20 to 30 seconds. It only needs to curl up a few millimeters.
If you’ve reached this point in the article, unfortunately, this means all else has failed. Small screwdriver for tension, dental pick for, uh, pick. Maybe wait a few more hours.
I got hold of the mailman, took out my mailbox lock, went to ace hardware store 3 blocks away, and bought a lock for $9.99 plus tax with great help from the very knowledgeable sales person. To pick these locks, you’ll need to elevate the pins to the same height that the key grooves would raise them to while tensioning the lock to keep the pins in place. Do not force the key into the lock, or force the key to turn, as this can cause your key to break.
You’ll end up pushing the pin roughly 2 or 3 inches to the left to get the right bend. Simply straighten one of the clips or pins out so you can bend it into an “l” shape. Once this one is broken, the letterbox door opens.